G-Code List Mug

Description

G-Code list printed on your coffee mug, never be without a reference list again.
Whether you’re drinking your morning coffee, evening tea, or something in between – this mug’s for you! It’s sturdy and glossy with a vivid print that’ll withstand the microwave and dishwasher.
• Ceramic
• Dishwasher and microwave safe
• White and glossy
Note: not all machines use the standard G-Code list of commands, below is the list printed on this mug.
G00 Positioning at rapid travel;
G01 Linear interpolation using a feed rate;
G02 Circular interpolation clockwise;
G03 Circular interpolation, counterclockwise;
G04 Dwell
G17 Select X-Y plane;
G18 Select Z-X plane;
G19 Select Z-Y plane;
G20 Imperial units;
G21 Metric units;
G27 Reference return check;
G28 Automatic return through reference point;
G29 Move to a location through reference point;
G31 Skip function;
G32 Thread cutting operation on a Lathe;
G33 Thread cutting operation on a Mill;
G40 Cancel cutter compensation;
G41 Cutter compensation left;
G42 Cutter compensation right;
G43 Tool length compensation;
G44 Tool length compensation;
G50 Set coordinate system (Mill);
G50 Maximum RPM (Lathe);
G52 Local coordinate system setting;
G53 Machine coordinate system setting;
G54 Set Datum;
G55 Set Datum;
G56 Set Datum;
G57 Set Datum;
G58 Set Datum;
G59 Set Datum;
G70 Finish cycle (Lathe);
G71 Rough turning cycle (Lathe);
G72 Rough facing cycle (Lathe);
G73 Pattern Repeating Cycle (Lathe);
G74 Left hand tapping (Mill);
G74 Face grooving cycle (Lathe);
G75 OD groove pecking cycle (Lathe);
G76 Boring cycle (Mill);
G76 Screw cutting cycle (Lathe);
G80 Cancel cycles;
G81 Drill cycle;
G82 Drill cycle with dwell;
G83 Peck drilling cycle;
G84 Tapping cycle;
G85 Bore in, bore out;
G86 Bore in, rapid out;
G87 Back boring cycle;
G90 Absolute programming;
G91 Incremental programming;
G92 Reposition origin point (Mill);
G92 Screw thread cutting cycle (Lathe);
G94 Per minute feed;
G95 Per revolution feed;
G96 Constant surface speed (Lathe);
G97 Constant surface speed cancel;
G98 Feed per minute (Lathe);
G99 Feed per revolution (Lathe);